Digi ConnectPort LTS Series User Manual

ConnectPort LTS disaster recovery Restore ConnectPort LTS to Factory Default Settings
Digi ConnectPort LTS User Guide
157
6. Enter the information for the first menu items.
n Protocol: The choices are BOOTP or TFTP.
n IP address assigned: Type the IP address of the Digi ConnectPort LTS unit.
n Server’s IP address: The IP address of the BOOTP or TFTP server.
n Firmware File Name: The filename for the firmware.
n Ethernet interface: 1 or 2.
7. Use the ESC key to return to previous menu screens.
8. Select Start firmware upgrade. The firmware upgrade can take 15 to 20 minutes to process.
Do not interact with the ConnectPort LTS unit until the firmware update is complete.
9. When the upgrade process is complete, the device will reboot and the factory default settings
will be restored.

Digi ConnectPort LTS Series Specifications

General

Brand	Digi
Model	ConnectPort LTS Series
Category	Server
Language	English