3590EKR, 3590EXP, 3590EXT, CPWE, CPWET series indicator E-AF09_02_16.03_EN_U
13.3.2.5 OUTPUT WEIGHING PROCEDURE
- After having selected the input weigh, the indicator waits for the first axle and displays:
3590E
LED display LCD display
CPWE
[In which: XXXXXX is the current weight on the scale
o means “output” weigh]
- Drive and stop the first axle of the vehicle on the scale.
- Wait a few instants, the axle will be acquired when:
1) the weight is greater than the minimum weight of the set axle.
2) the weight is stable.
- After the weight of the first axle is acquired, the indicator emits a sound and displays for an instant the following
message:
3590E
LED display LCD display
CPWE
[In which: YYYYYY is the acquired weight value, with unit of measure]
- Then the acquired weight blinks for a few seconds and the indicator executes the printout (if set):
3590E
LED display LCD display
CPWE
1 CUS MAT VEH
WAITING AXLE 1 o
XXXXXX
CUS MAT VEH
WAITING AXLE 1 o
AXLES: 1
TOT: YYYYYY UM o
tot
AXLES: 1
TOT: YYYYYY UM o
AXLES: 1
TOT: YYYYYY UM o
XXXXXX
AXLES: 1
TOT: YYYYYY UM o
To Next Page
Loading...
Need help?
General
