3590EKR, 3590EXP, 3590EXT, CPWE, CPWET series indicator E-AF09_02_16.03_EN_U
When the data on the RX and TX reception and transmission lines are correctly displayed, then the functioning of the relative
serial line is considered to be correct.
NOTE: By pressing the ./HELP key, it’s possible to see the keys list used in the menu.
15.3 CALCULATOR
Through function 113 combinable with the desired key (<< F.KEYS >> step, TECH.MAN.REF.), one enables the calculator
function.
ADDITION
MULTIPLICATION
SUBTRACTION
Procedure:
- Enter the first value using the numerical keyboard.
- Press F1 to add, F2 to multiply, F3 to subtract the value.
TERMINATE THE OPERATION:
- TYPE the second value and PRESS ENTER: the result will be shown for a few seconds on the display.
- TYPE the second value and PRESS TARE: the result will be shown for a few seconds on the display and will be added (if
an addition and multiplication) or subtracted (if a subtraction case) to the current tare value.
- PRESS 2nd F: the NET weight on the scale will be used as a second value and the result will be shown for a few seconds
on the display.
To disable the calculator function, press the C key.
15.3.1 HELP FUNCTION
By pressing at length the . /HELP key it is possible to see the list of the keys used in the calculator function.
The list is automatically scrolled. If one wants to scroll the list of the keys in manual mode, it is possible to use the arrow keys
(F6 and F7 ).
15.4 DISPLAY OF NET WEIGHT WITH SENSITIVITY X 10 (for testing use during calibration)
By pressing at length the F2 key one will view the net weight with sensitivity times 10 (press again at length the F2 key to
return to the normal visualisation).
NOTES:
- With approved indicator, the visualisation lasts about 5 seconds, after which it’s disabled.
- The printout can only be done when the indicator has the standard sensitivity.
15.5 SETTING DATE / TIME
By pressing at length the F3 key ‘it’s possible to quickly access the setting from the date / time of the instrument:
DAY ENTER MONTH ENTER YEAR ENTER HOUR ENTER MINUTES ENTER.
To Next Page
Loading...
Need help?
General
