Doosan G430 LP - Crankshaft Rear Oil Seal and Housing Removal; Crankshaft, Bearings and Bearing Cap Removal

- 136 -
LP Engine G430(3.0L) Base Engine Service Procedure
Crankshaft Rear Oil Seal and
Housing Removal
1. Remove the crankshaft rear oil seal housing bolts.
2. Remove the crankshaft rear oil seal housing, seal
and gasket.
3. Remove the crankshaft rear oil seal from the
crankshaft rear oil seal housing.
Crankshaft, Bearings and
Bearing Cap Removal
1. Remove the crankshaft bearing cap bolts.
2. Remove the crankshaft bearing caps.
3. Remove the crankshaft.
4. Remove the crankshaft bearings from the bearing
caps and from the engine block.
VE046-3L
VE045-3L
VE044-3L
VE043-3L