- 156 -
LP Engine G430(3.0L) Base Engine Service Procedure
Oil Pump Assemble
Tools Required
• J 21882 Oil Suction Pipe Installer
IMPORTANT: Replace the pressure relief valve spring
when you reuse the oil pump.
1. Install the following items:
• The pressure relief valve (2).
• The pressure relief valve spring (3).
• The retaining pin (1).
2. Coat the drive gear, the driven gear and the housing
gear surfaces with clean engine oil.
3. Install the drive gear (2) and the driven gear (1) into
the pump body. Align the matchmarks on the gears.
Install the smooth side of the gear toward the pump
cover.
4. Install the pump cover.
5. Install the cover bolts.
Tighten
Tighten the bolts to 8 N•m (72 lb•in).
VE083-3L
VE084-3L
VE085-3L
To Next Page
Loading...
Need help?
General
