EasyManuals Logo

Doosan G430 LP User Manual

Doosan G430 LP
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #95 background imageLoading...
Page #95 background image
- 94 -
LP Engine G430(3.0L) LP Fuel System (Low Emission Version)
NOTICE
The idle air/fuel mixture is factory set, therefore, no
further adjusstments are required. The part throttle
air/fuel mixture is factory set, therefore, no further
adjusstments are required. The full power air/fuel
mixture is factory set, therefore no, further
adjustments are required, either.
Inspect and lubricate throttle cable linkage every
500 service hours or 3 months.
LP Converter-Check, Clean
See, “LP Converter-Check, Clean” in LP Fuel System
Section.
Inspection of Fuel Lock Valve
1. When voltage is impressed to the terminal of fuel
lock-off, check whether there si operation sound.
2. If there is an abnormality, replace the fuel lock-
off.
Inspection of Fuel Control Valve
1. Connect a hand vacuum pump to the nipple A of
the vacuum switch.
2. Battery voltage is impressed between the
terminals of a fuel control valve, a hand vacuum
pump is connecting in nipple A, and vacuum is
applied.
3. If there is an abnormality, replace the fuel control
valve.
6EN2135
6EN2131
Items When B nipple is closed
When current is flowing Vacuum is felt with a finger.
When Current is not flowing Vacuum is not felt with a finger.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Doosan G430 LP and is the answer not in the manual?

Doosan G430 LP Specifications

General IconGeneral
BrandDoosan
ModelG430 LP
CategoryEngine
LanguageEnglish

Related product manuals