40
9. DEALING WITH THE ERROR MESSAGE
9-3. Removing Any Jammed Staples
When the staples are jammed, remove the cartridge or stapler head and remove the jammed
staples. After removing the staple, feed paper manually until stapling starts.
NOTE : If any jammed staples are on the clincher, also remove them.
Stapler head
Clincher
9-4. When “Malfunction” is Displayed
When “Malfunction” is displayed in the first line of the display, perform the following.
Remove any paper remaining in the unit.
Open and close the top cover.
Turn OFF the power and then turn it ON again.
<Machine serial number and total counter>
Total counter
Machine serial number
Your name (or the name of the company and
person in charge), address, and telephone
number
The model name:
DBM-120 (Stapler folder)
Machine serial number
The number displayed in the total counter
The message displayed in the second line of
the display
If the error message does not go away by above method, disconnect the power plug from the
power outlet and then contact your dealer.
Please let the service personnel have the following information:
To Next Page
Loading...
Need help?
General
