Duplo DP-21S II User Manual

37
2
1
22
Printing Using Basic Functions
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press
(ENLARGEMENT) key or (REDUCTION) key several times to display
the desired zoom ratio.
In about 3 seconds, the screen changes to the number display screen and the zoom ratio is selected.
Press
(ENLARGEMENT) key or
(REDUCTION) key to move the arrow on the LCD panel.
Tip
To return to “100%”, use one of the following two methods:
• Press
1:1
(100%) key. The 100% indicator lamp lights.
• Press (ALL CLEAR) key. In this case, all settings are reset to standard mode
(a page 24).
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
94% Reduction
In this mode, the copy is printed at 94% the size of the document. When it is not possible to print the edges of
the document image, this mode allows you to make a minor reduciton so that the edges of the image are
included.
IMPORTANT
• Select “94% Reduction” before platemaking.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press (FUNCTION SWITCH) key. Press
(SELECT) key several times to show the screen
at right.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Continue Page •••
Enlargement and Reduction
3.x 94%
1 2 3
141%
129% ST LT
141%
0sht 1set
◆ European paper sizes

141% B5 B4/A5 A4
122% A4 B4/A5 B5
141%
0sht 1set
◆ U.S paper sizes

Duplo DP-21S II Specifications

General

Brand	Duplo
Model	DP-21S II
Category	All in One Printer
Language	English