52
Printing Two Different Document Pages on One Page
■ 2 IN 1 Function
This mode prints two different document pages on one page.
Documents
Printout
Two-in-one (2-IN-1) Function allows you to print two small documents on one page and also easily print for
creating booklets that will be saddle stitched.
When you use 2-IN-1 Function, the layout is as follows:
IMPORTANT
• If you are printing the documents at 100%, select a printing paper that is the size of the two
documents.
• When you enlarge or reduce two documents size by side, select a zoom ratio so that the
documents fit exactly on one page.
• Select “2-IN-1 Function” before starting platemaking.
• Correct layout may not be obtainable with other than standard size papers.
Note the following when using 2-IN-1 Function:
•You must load the document in the ADF in portrait orientation.
•You must select a paper size and zoom ratio that will accommodate two documents.
1
2
3
4
Documents (even number)
1
2
3
4
5
Documents (odd number)
Printout1
21
Printout2
43
Printout3
5
Printout1
21
Printout2
43
To Next Page
Loading...
Need help?
General
