20
Control Panel
Part Names and Their Functions
No. Name Function
q “OK” monitor Flashes to display the content of the trouble and lights to indicated
the part that caused the trouble in the machine.
w “ENLARGEMENT” key Press to set the enlargement ratio.
“100%” key Press to reset the ration to 100%.
“REDUCTION” key Press to set the reduction ratio.
100% lamp Lights when the 100% ratio is selected.
e “DOCUMENT MODE Press to switch between the text mode, text/photograph mode and
photograph mode. Each press of this key moves the position of the
lit lamp that indicates the selected document mode.
Document mode indicator lamps
The lamp of the selected mode lights.
r LCD panel Displays the number of printed paper.
Also displays an error message when an error occurs.
t
“FUNCTION SWITCH” key
Press to toggle between the normal mode and the function select
mode.
“SELECT” key Press to select a function.
y “TEST PRINT” key Press to print only one piece of paper for checking the print dark-
ness or printed position.
u “PLATEMAKING” key Press to start platemaking.
Reference
page
85
36
37
36
37
42
44
22, 85
48
48
30
SWITCH” key
STD STD
1:1
q w e
!4!5!7 !6
To Next Page
Loading...
Need help?
General
