Approvals and version history
REVI-
SION DATE DESCRIPTION OF CHANGE APPROVED BY
001 17.04.2015 First issue Otto Asunmaa
002 06.07.2015 Minor updates Otto Asunmaa
003 14.07.2016 Updated to cover 93PS 8–20 kW
UPS C-model
Otto Asunmaa
004 28.05.2018 Minor updates. Recommended
secure hardening guidelines
added.
Otto Asunmaa
005 12.09.2018 91PS addition Otto Asunmaa
006 08.04.2020 Environmental and installation
considerations updated. MiniSlot
cards changed.
Otto Asunmaa
These are the original instructions.
Copyright © 2020 Eaton Corporation plc. All rights reserved.
This manual contains important instructions that you should follow during installation and
maintenance of the UPS and batteries. Please read all instructions before operating the
equipment and save this manual for future reference.
This is a product for commercial and industrial application in the second environment.
Installation restrictions or additional measures may be needed to prevent disturbances.
The contents of this manual are the copyright of the publisher and may not be
reproduced (even extracts) without the written approval of Eaton Corporation. Every care
has been taken to ensure the accuracy of the information contained in this manual, but
no liability can be accepted for any errors or omission. The right to make design
modifications is reserved.
Unauthorized copying and lending are prohibited.
Eaton Power Quality Oy
Address: Koskelontie 13
FI-02920 Espoo
FINLAND
Internet: www.eaton.eu
© Eaton Corporation plc 2020. All rights reserved. Revision: 006 Document ID: P-164000493 2 (126)
Eaton 91PS/93PS UPS 8–40 kW User’s and Installation Guide
To Next Page
Loading...
Need help?
General
