Name: Eaton 91PS
Brand: Eaton
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Bypass input and output overcurrent protection and bypass, output and

accessory disconnect switches must be provided by the user.

4.5 Unpack and unload the UPS

Before you start to unpack and unload the UPS, look at the TipNTell indicator on

the package surface. When you have unpacked and unloaded the UPS, look at

the DropNTell indicator on the back of the UPS. If the equipment has been

correctly transported in the upright position, the indicators should be intact. If the

TipNTell indicator arrow has turned all blue or the arrow head(s) of the DropNTell

are black, contact the appropriate parties to report inappropriate transportation.

WARNING

The UPS cabinet is heavy. If you do not obey the unpacking instructions,

the cabinet may tip over and cause serious injury.

Do not tilt the UPS cabinet more than 10 degrees from the vertical or the

cabinet may tip over.

For transportation purposes, the UPS cabinet is bolted onto a wooden pallet. To

remove the pallet, do the following:

1. Before you unload the cabinet from the pallet, use a forklift or other material

handling equipment to move the cabinet to the installation area. Insert the

forks of the forklift between the skids on the bottom of the unit.

Eaton 91PS/93PS UPS 8–40 kW User’s and Installation Guide

Eaton 91PS User Manual

Other manuals for Eaton 91PS