Figure 38: Parts of the display
The display consists of the following parts:
1. Status bar. The status bar displays the UPS name, state, current date and
time, meters information, and a sign in/out button. It also shows any active
alarms and warnings.
2. Main navigation. Select a screen by tapping on its name.
3. Content area. This is the main area for showing information on the UPS
status and operations.
4. Status indicators. See Section 7.2.2 Status indicators.
7.2.2 Status indicators
The four symbols below the display are status indicators. They are colored light
emitting diode (LED) lamps, and they work in conjunction with the alarm horn to
let you know the operating status of the UPS.
Table 24: Status indicators
Indicator
Status Description
Green symbol for
normal operation
On The UPS is operating normally and supplying
power to the critical load.
Off The UPS is turned off.
Yellow symbol for
battery mode
On The UPS is in the battery mode. Because the
battery mode is a normal condition of the UPS,
the green indicator for normal operation also
remains illuminated.
© Eaton Corporation plc 2020. All rights reserved. Revision: 006 Document ID: P-164000493 89 (126)
Eaton 91PS/93PS UPS 8–40 kW User’s and Installation Guide
To Next Page
Loading...
Need help?
General
