Type VSA12, VSA16 and VSA20/800 maintenance instructions
16MAINTENANCE INSTRUCTIONS MN280064EN October 2017
Service parts list
The service parts and hardware listed and illustrated include
only those parts and assemblies usually furnished for repair
or involved in the maintenance procedures described in
this manual. Further breakdown of listed assemblies is
notrecommended.
Dimensions of all common hardware parts have been
carefully checked so that they may be locally acquired.The
suffix letter of the 14 character catalog number for common
hardware parts codes the plating of the part:
A - No plating; raw material
H - Silver
M - Black oxide
Q - Cadmium + zinc + chromate
Y - Zinc + chromate
Z - Electro zinc + bronze irridite
A hardware kit, Catalog No. KA849R1, contains
anassortment of roll pins, cotter pins, retaining rings,
stopnuts, etc.—common hardware parts used in Eaton’s
Cooper Power series reclosers that may not be readily
locally available.
To assure correct receipt of any part order, always include
recloser type and serial number. Because of Eaton’s
continuous improvement policy, there may be instances
where the parts furnished may not look exactly the same
as the parts ordered. However, they will be completely
interchangeable without any rework of the recloser.
Prices of Replacement Parts, Section S280-01 Part No.45,
lists recommended spare parts and prices for mostparts.
Parts not listed in price list may still be available,consult your
Eaton representative for price and availability.
To Next Page
Loading...
Need help?
General
