Emerson Site Supervisor User Manual

Appendix A: Alarm Advisories • A-1
Appendix A: Alarm Advisories
The table below is a list of all alarm messages that may appear in Site Supervisor Alarm Advisory
Log. Each alarm message is listed by its Alarm Items, Alarm Category and Cell Name.
Alarm Items Category Cell Name Description
Read Data Failed AI 01 Device Alarm IPX6/IPX15/
IPX25
Can be configured to different sensor types; they can
be configured as “Input not used” or “Digital Input”. If
configured to a specific type sensor, whereas there is
no sensor connected to this port or there is something
wrong with the connected sensor, and no valid data can
be read from the analog input, the corresponding alarm
will be generated. The alarm is not applicable if the
analog input is configured to “Input not used” or “Dig-
ital Input”.
Read Data Failed AI 02 Device Alarm IPX6/IPX15/
IPX25
Can be configured to different sensor types; they can
be configured as “Input not used” or “Digital Input”. If
configured to a specific type sensor, whereas there is
no sensor connected to this port or there is something
wrong with the connected sensor, and no valid data can
be read from the analog input, the corresponding alarm
will be generated. The alarm is not applicable if the
analog input is configured to “Input not used” or “Dig-
ital Input”.
Read Data Failed AI 03 Device Alarm IPX6/IPX15/
IPX25
Can be configured to different sensor types; they can
be configured as “Input not used” or “Digital Input”. If
configured to a specific type sensor, whereas there is
no sensor connected to this port or there is something
wrong with the connected sensor, and no valid data can
be read from the analog input, the corresponding alarm
will be generated. The alarm is not applicable if the
analog input is configured to “Input not used” or “Dig-
ital Input”.
Read Data Failed AI 04 Device Alarm IPX6/IPX15/
IPX25
Can be configured to different sensor types; they can
be configured as “Input not used” or “Digital Input”. If
configured to a specific type sensor, whereas there is
no sensor connected to this port or there is something
wrong with the connected sensor, and no valid data can
be read from the analog input, the corresponding alarm
will be generated. The alarm is not applicable if the
analog input is configured to “Input not used” or “Dig-
ital Input”.
Read Data Failed AI 05 Device Alarm IPX6/IPX15/
IPX25
Can be configured to different sensor types; they can
be configured as “Input not used” or “Digital Input”. If
configured to a specific type sensor, whereas there is
no sensor connected to this port or there is something
wrong with the connected sensor, and no valid data can
be read from the analog input, the corresponding alarm
will be generated. The alarm is not applicable if the
analog input is configured to “Input not used” or “Dig-
ital Input”.

Emerson Site Supervisor Specifications

General

Brand	Emerson
Model	Site Supervisor
Category	Controller
Language	English