Entrust Sigma DS1 User Manual

Sigma DS1, DS2, DS3 Card Printer User’s Guide 5
Printer Front and Right Side
Single-Hopper Printer
Input Hopper The input hopper holds cards for printing. The hopper holds up to
125 cards (0.030 in. or 0.762 mm thickness).
The input hopper can be removed from the printer for secure
storage.
Input Hopper Release
Buttons
The release buttons allow you to remove the input hopper from the
printer. Push in the buttons, squeeze the cartridge, and pull it out
from the printer.
Exception Slot Use the exception slot to insert a single card, such as a different card
type than those loaded in the input hopper.
Front Panel Use the front panel to work with the printer. The LCD panel displays
printer messages and status information. The buttons allow you to
power the printer on and off, and navigate the printer menu system.
Output Hopper The output hopper holds up to 25 completed cards.
LED Light Bar The LED light bar blinks to indicate a printer error status. It is a solid
color when the printer is in Ready status.
Output
Hopper
Input Hopper
Input
Hopper Lock
Printer Lock
Reject Tray
LED Light Bar
Exception
Slot
Front Panel
Input Hopper
Release Buttons

Entrust Sigma DS1 Specifications

General

Brand	Entrust
Model	Sigma DS1
Category	Printer
Language	English