Entrust Sigma DS1 User Manual

Sigma DS1, DS2, DS3 Card Printer User’s Guide 27
Multi-Hopper Printer
1. Unlock the multi-hopper lock.
2. Slide the lock bar release button (B1) to
the left to release the hopper lock bars.
3. Rotate a lock bar to the left to provide
access to the multi-hopper input
cartridge that you want to load.
4. Press the cartridge release button at the
top of the cartridge and open the
cartridge door.
5. Lift the card weight to the top of the
cartridge and gently pull it forward until it
locks in position.
6. Load the cards into the input hopper
cartridge. Handle the cards by the edges
only, or wear approved card inspection
gloves.
7. Close the cartridge door. This releases the card weight so that it is lowered on top of the
cards.
8. Follow step 3 through step 7 to load cards into each input hopper cartridge.
9. Rotate all the lock bars back into position.
 The diagrams inside the cartridge show how to
position the card weight and load cards. Do not place
the cards on top of the card weight.
 You do not need to remove the cartridge from the
multi-hopper to load cards.
1
2
3
4
5
6
Cards
Card
Weight

Entrust Sigma DS1 Specifications

General

Brand	Entrust
Model	Sigma DS1
Category	Printer
Language	English