Entrust Sigma DS3 User Manual

Sigma DS1, DS2, DS3 Card Printer User’s Guide 11
Prefilled Print Ribbon Cassette
The prefilled print ribbon cassette is an all-in-one, one-time-use print ribbon, cleaning roller, and
ribbon cartridge.
Print Ribbon The print ribbon is used to apply images to the card.
Ribbon Cassette
Handle
Use the handle to remove the cassette from the printer.
Cleaning Roller The cleaning roller removes dust and other particles from the cards
as they move into the printer. The cleaning roller is pre-installed on
the cassette.
Ribbon Cassette The ribbon cassette is shipped in a closed position and must be
extended to its fully open position before installing it in the printer.
Refer to “Install the Prefilled Print Ribbon Cassette” on page 30.
Ribbon Cassette
Handle
Ribbon Cassette
Print Ribbon
Cleaning
Roller

Entrust Sigma DS3 Specifications

General

Print Resolution	300 dpi
Card Capacity Input Hopper	100 cards
Card Capacity Output Hopper	25 cards
Power Supply	100-240 VAC, 50/60 Hz
Print Technology	Dye sublimation
Print Capabilities	Single or dual-sided
Card Thickness	0.010 inches to 0.040 inches
Supported Card Sizes	CR80 (85.6 mm x 54 mm)
Connectivity	USB and Ethernet
Operating System Support	Windows 7, 8, 10, Server 2008, 2012, 2016
Weight	5.49 kg (12.1 lbs)
Operating Temperature	15°C to 35°C (60°F to 95°F)
Operating Humidity	20% to 80% (non-condensing)
Print Speed	Up to 250 cards per hour (YMCKT)