Entrust Sigma DS3 User Manual

Sigma DS1, DS2, DS3 Card Printer User’s Guide 13
Printer Configuration Label
The printer configuration label on the side of the cover
swingarm shows the components installed. It provides
information that is useful when requesting service.
The label shows the following information:
 Printer model and serial number
 Configuration, which includes options installed in the
printer
 Date and country of assembly
Additional labels may be attached to the printer to indicate
components installed after the printer was manufactured.
Option Configuration Code
Printer Model Features
and Enclosures
E1=DS1
E2=DS2
E3=DS3
Input Hopper H0=No Hopper (Multi-Hopper Ready)
H1, H2, H3, H4=125-Card Input Hopper with additional features
(locks and card sensors)
Duplex D0=Simplex, Duplex Upgrade Ready
D1=Duplex
blank=Simplex
Magnetic Stripe M1=ISO
M2=JIS
blank=No Magnetic Stripe option
Configuration
Label

Entrust Sigma DS3 Specifications

General

Brand	Entrust
Model	Sigma DS3
Category	Printer
Language	English