Entrust Sigma DS3 User Manual

Sigma DS1, DS2, DS3 Card Printer User’s Guide 39
4. Load the cleaning card into the input hopper.
5. Close and lock the input hopper.
6. Continue with “Run the Cleaning Card”.
Multi-Hopper Printer
1. Unlock the printer and open the printer cover.
2. Remove the print ribbon, close the cover, and lock the printer.
3. Pull out the multi-hopper exception slide and
insert the cleaning card.
4. Push in the exception slide.
5. Continue with “Run the Cleaning Card”.
Run the Cleaning Card
Use the LCD menu system to start the cleaning cycle.
1. Begin when the printer displays Ready. Press the USER
button.
2. Suspended displays on line 1 of the LCD panel. Press E
NTER
to enter the menu system.
3. Maintenance displays on line 3 of the LCD panel. Press
E
NTER to enter the Maintenance menu.

Entrust Sigma DS3 Specifications

General

Brand	Entrust
Model	Sigma DS3
Category	Printer
Language	English