Name: ePropulsion SPIRIT 1.0
Brand: ePropulsion
Rating: 4 (1 reviews)

To Next Page

To Previous Page

- 16 -

Operation

4.1

Checking List before Start

1. Check and ensure the battery has enough charge.

2. Ensure the outboard is correctly and firmly installed on the boat.

3. Ensure the propeller is correctly and firmly installed on the outboard.

4. Ensure the battery is correctly and firmly installed on the outboard.

5. Before start, check and ensure the throttle is in zero position.

6. Ensure the throttle can travel smoothly.

7. Check the connections before each trip, ensure the connections are

correct and secure, no disconnection or worn or aging connections.

8. Check and ensure the power port is dry to avoid short-circuit.

Only start the outboard when the propeller is under water.

If the cable has been immersed in water, please dry the cable thoroughly

before connection or power on.

4.2

Starting

Step1:

Put the magnetic key on the pointed position of tiller.

Figure 4-1

Step2:

Attach the other end of the magnetic key to your wrist or life vest.

Questions and Answers:

Need help?

Do you have a question about the ePropulsion SPIRIT 1.0 and is the answer not in the manual?

ePropulsion SPIRIT 1.0 Specifications

General