ePropulsion SPIRIT 1.0 User Manual

- 36 -
10.3 Changing the Anode
Please refer to the figure below to replace a new anode if necessary.
Figure 10-1
10.4 Maintenance Time Table
Regular maintenance in proper manner and use in normal condition, the
outboard can work at optimal state. Following table show a general
maintenance frequency, however it may be adjusted according to operating
conditions.
Item Operations
Initial Every
10 hours
(1 month)
50 hours
(3 months)
100 hours
(6 months)
200 hours
(12 months)
Anode
Check/
Replace
 

Greasing
points
Greasing


Propeller
and Pin
Check
/Replace
 

The“”symbol indicates checks may carry out by users. The“”symbol
indicates work to be carried out by your dealer.

ePropulsion SPIRIT 1.0 Specifications

General

Power	1 kW
Battery Type	Lithium-ion
Battery Capacity	1276 Wh
Control	Tiller
Propulsion	Electric
Battery Weight	8.7 kg
Rated Power	1 kW
Comparable Petrol Outboard	3 HP
Nominal Voltage	48 V
Voltage	48 V
Shaft Length	Short, Long
Motor Type	Brushless DC
Max Speed	5 knots (with standard battery)
Charging Time	8.5 hours