Name: ePropulsion SPIRIT 1.0
Brand: ePropulsion
Rating: 4 (1 reviews)

To Next Page

To Previous Page

- 33 -

Anti-grounding Mode

When the boat runs in shallow water or complicated underwater conditions,

it may have grounding dangers. Set the outboard in anti-grounding mode will

protect the outboard motor from damage if the outboard hits submerged

reefs or rocks. In anti-grounding mode, the underwater part of outboard is

flexible in tilting direction and the motor will tilt up if it hits something

underwater.

Never turn the throttle backward when the outboard is in anti-grounding

mode.

To set the outboard in anti-grounding mode:

Step1

Pull the pin to the limit and hold, then toggle the tilt handle to upmost

position.

Pull

and

hold

Toggle

Figure 9-1 Figure 9-2

Step2

: Release the pin and the tilt handle will stay at the position shown in the

figure below. And then the anti-grounding mode is activated.

Figure 9-3

Questions and Answers:

Need help?

Do you have a question about the ePropulsion SPIRIT 1.0 and is the answer not in the manual?

ePropulsion SPIRIT 1.0 Specifications

General