EasyManuals Logo

ePropulsion SPIRIT 1.0 User Manual

ePropulsion SPIRIT 1.0
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
- 39 -
11.2
Placement
When place the outboard on the ground, ensure the ground is flat and clean.
It’s better to put some damping cotton or cushion under the outboard to
prevent damage.
11.3
Storage
If your outboard is going to be stored for more than 2 months, it’s advised to
have the outboard cleaned, checked prior to storage. It’s recommended to
pack the outboard with ePropulsion original packing for storage.
Take adequate damping-absorber protections before transport and
storage. And ensure the propeller receives no pressure if the propeller is
installed on the propeller shaft.
Store the outboard in a dry, well ventilated place, not in direct sunshine.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ePropulsion SPIRIT 1.0 and is the answer not in the manual?

ePropulsion SPIRIT 1.0 Specifications

General IconGeneral
Power1 kW
Battery TypeLithium-ion
Battery Capacity1276 Wh
ControlTiller
PropulsionElectric
Battery Weight8.7 kg
Rated Power1 kW
Comparable Petrol Outboard3 HP
Nominal Voltage48 V
Voltage48 V
Shaft LengthShort, Long
Motor TypeBrushless DC
Max Speed5 knots (with standard battery)
Charging Time8.5 hours

Related product manuals