Selecting the Line Type
If you connect the product to a PBX (Private Branch Exchange) phone system or terminal adapter, you
must change the product's line type. PBX is used in office environments where an external access code
such as “9” must be dialed to call an outside line. The default Line Type setting is PSTN (Public Switched
Telephone Network), which is a standard phone line, similar to the one in your home.
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Press the up or down arrow button, select Setup, and press the OK button.
2. Press the up or down arrow button, select Fax Settings, and press the OK button.
3. Press the up or down arrow button, select Basic Settings, and press the OK button.
4. Press the up or down arrow button, select Line Type, and press the OK button.
You see this screen:
5. If you connected the product to a PBX phone system, select PBX.
You see this screen:
153
To Next Page
Loading...
Need help?
General
