Horizontal alignment
• After choosing a pattern number, click Next.
• If no patterns are aligned in one or more of the sets, choose the closest one in each set and click
Realignment. Then print another alignment sheet and check it.
Note: Click Skip (where available) if you want to skip a particular alignment sheet.
6. When you are done, click Finish.
Parent topic: Print Head Alignment
Related tasks
Loading Paper in the Cassette
Cleaning the Paper Path
If you see ink on the back of a printout, you can clean the paper path to remove any excess ink.
Caution: Do not use tissue paper to clean the rollers inside the product; lint from tissue paper may clog
the print head nozzles.
1. Load a few sheets of plain paper in the product.
2. Press the up or down arrow button to select Setup.
3. Press the up or down arrow button to select Maintenance.
4. Press the up or down arrow button to select Paper Guide Cleaning.
5. Follow the on-screen instructions to clean the paper path.
6. Repeat as necessary until the paper comes out clean.
216
To Next Page
Loading...
Need help?
General
