3. Press the up or down arrow button to select one of these options and press the OK button.
• Network Settings: Restores all of the default network settings.
• Fax Settings: Restores all of the fax settings.
• Clear All Data and Settings: Restores all of the default settings and resets contact and network
data on the control panel.
You see a confirmation screen.
4. Press the up arrow button to reset the selected settings. Press the down arrow button if you want to
cancel the operation.
Parent topic: Solving Problems
Solving Setup Problems
Check these sections if you have problems while setting up your product.
Noise After Filling the Ink
Software Installation Problems
Control Panel Setup Problems
USB Connection Problems
Parent topic: Solving Problems
Noise After Filling the Ink
If you hear noises from your product after filling the ink tanks with ink, check these explanations:
• The first time you fill the tanks with ink, the product must charge its print head. Wait until charging
finishes before you turn off the product, or it may charge improperly and use excess ink the next time
you turn it on.
• If the product's print head stops moving or making noise, and the charging process has not finished
after approximately 20 minutes, turn off your product. Turn it back on and check to see if charging is
still in progress. If it is still in progress, contact Epson for help.
Parent topic: Solving Setup Problems
230
To Next Page
Loading...
Need help?
General
