EasyManuals Logo
Home>Epson>Projector>PowerLite EB-L210SF

Epson PowerLite EB-L210SF User Manual

Epson PowerLite EB-L210SF
289 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
106
1. Turn on the projector and display an image.
2. To enlarge the image size, press the W (Wide) button on the projector's control panel.
3. To reduce the image size, press the T (Tele) button.
Note: If the projector is installed out of reach, you can also adjust the image size with the remote
control using the Digital Zoom setting in the projector menus.
Parent topic: Using Basic Projector Features
Setting the Screen Type
You can use the Screen Type setting to match the aspect ratio of the displayed image to the screen you
are using.
Note: This setting is unavailable when using the USB or LAN input source.
Note: If you change the Screen Type setting, the EDID settings are automatically adjusted. You cannot
change the Screen Type setting when the Content Playback setting is enabled.
Note: Certain screen type settings are only available on select projector models.
1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select the Installation menu and press Enter.
4. Select the Screen Type setting and press Enter.
You see a screen like this:
5. Select your screen's aspect ratio and press Enter.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson PowerLite EB-L210SF and is the answer not in the manual?

Epson PowerLite EB-L210SF Specifications

General IconGeneral
DVI portNo
Microphone inYes
Audio (L/R) in1
Composite video in-
Serial interface typeRS-232C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity3
Matrix size0.62 \
Heat dissipation884 BTU/h
Number of colors1.07 billion colors
White light output4000 ANSI lumens
Native aspect ratio16:9
Projection technology3LCD
Contrast ratio (dynamic)2500000:1
Screen size compatibility55 - 125 \
Keystone correction, horizontal-15 - 15 °
Video color modesBlackboard, Cinema, DICOM simulation mode, Dynamic, Multi-projection, Presentation, sRGB
Supported video modes1080p
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Noise level37 dB
Country of originPhilippines
Noise level (economic mode)27 dB
Light source typeLaser
Service life of light source20000 h
Service life of light source (economic mode)30000 h
Color depth10 bit
FocusManual
Throw ratio0.45 - 0.61:1
PlacementCeiling, Desktop, Wall
Product typeShort throw projector
Product colorWhite
Market positioningPortable
Cable lock slot typeKensington
Supported network protocolsHTTPS, IPv4, IPv6, SNMP, ESC/VP.net, PJLink
Cord length1.8 m
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50/60 Hz
Power consumption (standby)0.5 W
Power consumption (typical)201 W
Power consumption (economy mode)191 W
RMS rated power16 W
Cables includedAC, HDMI
Bundled softwareEasyMP Multi PC Projection, Epson Projector Content Manager, Epson Projector Management
Storage temperature (T-T)-10 - 60 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth337 mm
Width325 mm
Height90 mm
Weight4600 g

Related product manuals