EasyManuals Logo
Home>Epson>Projector>PowerLite EB-L210SF

Epson PowerLite EB-L210SF User Manual

Epson PowerLite EB-L210SF
289 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
38
2. Turn on the microphone, if necessary.
3. If you hear a crackling noise or the volume is too high or low, adjust the Mic Input Level setting in
the Signal I/O menu.
Parent topic: Connecting External Output Devices
Connecting to External USB Devices
Follow the instructions in these sections to connect external USB devices to the projector.
USB Device Projection
Connecting a USB Device or Camera to the Projector
Selecting the Connected USB Source
Disconnecting a USB Device or Camera From the Projector
Parent topic: Projector Connections
USB Device Projection
You can project images and other content without using a computer or video device by connecting any of
these devices to your projector:
USB flash drive
Digital camera or smartphone
USB hard drive
Note: Digital cameras or smartphones must be USB-mounted devices, not TWAIN-compliant devices,
and must be USB Mass Storage Class-compliant.
Note: USB hard drives must meet these requirements:
USB Mass Storage Class-compliant (not all USB Mass Storage Class devices are supported)
Formatted in FAT16 or FAT32
Self-powered by their own AC power supplies (bus-powered hard drives are not recommended)
Does not have multiple partitions
You can project slide shows from image files on a connected USB device.
You can also project playlists that contain images and movies saved on a USB device when in Content
Playback mode.
Parent topic: Connecting to External USB Devices

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson PowerLite EB-L210SF and is the answer not in the manual?

Epson PowerLite EB-L210SF Specifications

General IconGeneral
DVI portNo
Microphone inYes
Audio (L/R) in1
Composite video in-
Serial interface typeRS-232C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity3
Matrix size0.62 \
Heat dissipation884 BTU/h
Number of colors1.07 billion colors
White light output4000 ANSI lumens
Native aspect ratio16:9
Projection technology3LCD
Contrast ratio (dynamic)2500000:1
Screen size compatibility55 - 125 \
Keystone correction, horizontal-15 - 15 °
Video color modesBlackboard, Cinema, DICOM simulation mode, Dynamic, Multi-projection, Presentation, sRGB
Supported video modes1080p
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Noise level37 dB
Country of originPhilippines
Noise level (economic mode)27 dB
Light source typeLaser
Service life of light source20000 h
Service life of light source (economic mode)30000 h
Color depth10 bit
FocusManual
Throw ratio0.45 - 0.61:1
PlacementCeiling, Desktop, Wall
Product typeShort throw projector
Product colorWhite
Market positioningPortable
Cable lock slot typeKensington
Supported network protocolsHTTPS, IPv4, IPv6, SNMP, ESC/VP.net, PJLink
Cord length1.8 m
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50/60 Hz
Power consumption (standby)0.5 W
Power consumption (typical)201 W
Power consumption (economy mode)191 W
RMS rated power16 W
Cables includedAC, HDMI
Bundled softwareEasyMP Multi PC Projection, Epson Projector Content Manager, Epson Projector Management
Storage temperature (T-T)-10 - 60 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth337 mm
Width325 mm
Height90 mm
Weight4600 g

Related product manuals