187
All the lights start flashing to indicate that the projector's settings are being updated. Disconnect the
USB cable. When all of the indicators stop flashing, the projector turns off.
Caution: Do not unplug the power cord while the lights are flashing. This could damage the
projector.
Parent topic: Copying Menu Settings Between Projectors
Scheduling Projector Events
You can save a projector command, such as turning the projector on or off or switching input sources, as
an "event." You can schedule when you want the projector to automatically execute the command.
Warning: Do not place flammable objects in front of the lens. If you schedule the projector to turn on
automatically, flammable objects in front of the lens could catch on fire.
Note: The Schedule setting in the Menu Protection menu must be turned off to schedule an event.
Saving a Scheduled Event
Viewing Scheduled Events
Editing a Scheduled Event
Parent topic: Adjusting Projector Features
Saving a Scheduled Event
You can select projector commands you want to perform and schedule them as an event.
Warning: Do not place flammable objects in front of the lens. If you schedule a projector to turn on
automatically, flammable objects in front of the lens could catch on fire.
Note: The Schedule setting in the Menu Protection menu must be turned off to schedule an event.
1. Press the Menu button.
2. Select the Management menu and press Enter.
3. Select the Schedule Settings setting and press Enter.
4. Select the Schedule menu and press Enter.
5. Select Add New and press Enter.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
