EasyManuals Logo
Home>Epson>Projector>PowerLite EB-L210SF

Epson PowerLite EB-L210SF User Manual

Epson PowerLite EB-L210SF
289 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #160 background imageLoading...
Page #160 background image
160
4. Press the left or right arrow button to select Adjustment Level 8.
Note: There are several adjustment levels and you can adjust each level individually.
5. Press the left or right arrow buttons to adjust the Brightness setting.
6. Press the left or right arrow buttons to adjust the color tone for the Red, Green, and Blue settings if
necessary.
7. Press Esc to return to the Multi-Projection menu.
8. Select the Operation menu and press Enter.
9. Select Light Source Brightness Control and press Enter.
10. Set the Light Source Mode setting to Custom and adjust the Brightness Level setting as
necessary.
11. Press Esc and repeat steps 2 through 6 for Adjustment Level 7 through 2.
12. When you are finished, press the Menu button.
Parent topic: Using Multiple Projectors
Adjusting the Black Level
When two images overlap, the overlapping area can appear differently from the areas that do not
overlap. You can use the projector's Black Level setting to make the difference less noticeable (EB-
L210SF).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson PowerLite EB-L210SF and is the answer not in the manual?

Epson PowerLite EB-L210SF Specifications

General IconGeneral
DVI portNo
Microphone inYes
Audio (L/R) in1
Composite video in-
Serial interface typeRS-232C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity3
Matrix size0.62 \
Heat dissipation884 BTU/h
Number of colors1.07 billion colors
White light output4000 ANSI lumens
Native aspect ratio16:9
Projection technology3LCD
Contrast ratio (dynamic)2500000:1
Screen size compatibility55 - 125 \
Keystone correction, horizontal-15 - 15 °
Video color modesBlackboard, Cinema, DICOM simulation mode, Dynamic, Multi-projection, Presentation, sRGB
Supported video modes1080p
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Noise level37 dB
Country of originPhilippines
Noise level (economic mode)27 dB
Light source typeLaser
Service life of light source20000 h
Service life of light source (economic mode)30000 h
Color depth10 bit
FocusManual
Throw ratio0.45 - 0.61:1
PlacementCeiling, Desktop, Wall
Product typeShort throw projector
Product colorWhite
Market positioningPortable
Cable lock slot typeKensington
Supported network protocolsHTTPS, IPv4, IPv6, SNMP, ESC/VP.net, PJLink
Cord length1.8 m
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50/60 Hz
Power consumption (standby)0.5 W
Power consumption (typical)201 W
Power consumption (economy mode)191 W
RMS rated power16 W
Cables includedAC, HDMI
Bundled softwareEasyMP Multi PC Projection, Epson Projector Content Manager, Epson Projector Management
Storage temperature (T-T)-10 - 60 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth337 mm
Width325 mm
Height90 mm
Weight4600 g

Related product manuals