User-defined Paper Sizes/
Custom Paper Sizes
You can also print on paper sizes that are not already
available in the printer driver. User-defined paper sizes
that have created and saved as described below can be
selected using the application page setup option. If your
application supports creating user defined sizes, follow
the steps below to select the same size that was created in
the application, and then print.
c
Important:
❏ Although the printer driver allows you to
choose paper sizes larger than the size that can
be loaded into the printer, they may not print
correctly.
See the following for information on the paper
sizes supported by this printer.
U “Supported Media” on page 97
❏ The available output size is limited depending
on the application.
The printer driver supports the following paper sizes.
Auto sheet feeder
Width 89 to 329 mm
Length
*
Windows: 127 to 15,000 mm
Mac OS X: 55 to 15,240 mm
Rear manual feed (fine art media)
Width Windows: 210 to 329 mm
Mac OS X: 89 to 329 mm
Length
*
Windows: 279.4 to 15,000 mm
Mac OS X: 55 to 15,240 mm
Front manual feed (poster board)
Width Windows: 203.2 to 329 mm
Mac OS X: 89 to 329 mm
Length
*
Windows: 254 to 15,000 mm
Mac OS X: 55 to 15,240 mm
Roll paper
Width 89 to 329 mm
Length
*
Windows: 55 to 15,000 mm
Mac OS X: 55 to 15,240 mm
* The paper length can be longer if the application supports
banner printing. However, the actual print size depends on
the application, the paper size loaded in the printer, and the
computer environment.
Making Settings in Windows
A
When the printer driver's Main screen is
displayed, click User Defined.
U “Printing (Windows)” on page 27
B
In the User Defined Paper Size screen, set the
paper size you want to use, and then click Save.
❏ You can enter up to 24 single-byte characters
for the Paper Size Name.
❏ The length and width values for a pre-defined
size close to the desired custom size can be
displayed by selecting the appropriate option
in the Base Paper Size menu.
SC-P400 Series User's Guide
Printing Varieties
62