Paper light Status What to do
Flashing
The printer cover is open. Close the printer cover.
Paper or the CD/DVD tray is jammed. Remove jammed paper as described in the
following sections.
U “Paper Jams when Printing from the
Auto Sheet Feeder” on page 94
U “Jammed Fine Art Media” on
page 95
U “Jammed Thick Paper, CD or DVD” on
page 95
U “Roll paper jam” on page 96
Printing was canceled while printing on
thick paper, CD or DVD.
Remove the thick paper, CD or DVD, and
then press the I button.
The source selected in the printer driver
does not match the actual source.
Match the source selected in the printer
driver to the actual source.
You tried to print a nozzle check pattern
using a feeding method other than the
auto sheet feeder.
Press the I button.
U “Checking for clogged nozzles” on
page 77
Network-Related Errors
Network light Status What to do
Right side
flashing
An error occurred during push button auto
setup (AOSS/WPS).
❏ Adjust settings and try again.
The wireless LAN access point must
also be in setup mode. You can also
try moving the printer closer to the
wireless LAN access point (try for a
distance of about 3 m or less).
❏ Another wireless device in the same
area is also attempting to connect
using push button auto setup (AOSS/
WPS). Try again after a short wait.
An attempt was made to connect to a
wireless network while the printer was
connected to an Ethernet LAN.
End the connection to the Ethernet LAN
before adjusting wireless settings.
Other Errors
Paper light Ink light Status What to do
Flashing (both)
An unrecoverable error has
occurred.
Turn printer off and then on
again.
SC-P400 Series User's Guide
Problem Solver
87
To Next Page
Loading...
Need help?
General