EPSON Stylus C110/C120/D120 Revision B
PRODUCT DESCRIPTION Interface 15
1.3 Interface
The printer has a USB interface of the following specification.
Standards
“Universal Serial Bus Specifications Revision 2.0”
“Universal Serial Bus Device Class Definition for Printing Devices Version 1.1”
Transfer rate: 480 Mbps (High Speed Device)
Data format: NRZI
Compatible connector: USB Series B
Recommended cable length: 2 [m] or less
1.4 General Specifications
1.4.1 Electrical Specifications
Primary power input
Note : If the printer is not operated for more than three minutes, the printer shifts into the
standby mode and reduces the current to the motor to conserve power.
Table 1-8. Device ID
Product
Name
When IEEE 1284.4 is Enabled When IEEE 1284.4 is Disabled
Stylus C120
MFG:EPSON;
CMD:ESCPL2,BDC,D4,D4PX;
MDL:Stylus[SP]C120;
CLS:PRINTER;
DES:EPSON[SP]Stylus[SP]C120;
MFG:EPSON;
CMD:ESCPL2,BDC;
MDL:Stylus[SP]C120;
CLS:PRINTER;
DES:EPSON[SP]Stylus[SP]C120;
Stylus D120
MFG:EPSON;
CMD:ESCPL2,BDC,D4,D4PX;
MDL:Stylus[SP]D120;
CLS:PRINTER;
DES:EPSON[SP]Stylus[SP]D120;
MFG:EPSON;
CMD:ESCPL2,BDC;
MDL:Stylus[SP]D120;
CLS:PRINTER;
DES:EPSON[SP]Stylus[SP]D120;
Stylus C110
MFG:EPSON;
CMD:ESCPL2,BDC,D4,D4PX;
MDL:Stylus[SP]C110;
CLS:PRINTER;
DES:EPSON[SP]Stylus[SP]C110;
MFG:EPSON;
CMD:ESCPL2,BDC;
MDL:Stylus[SP]C110;
CLS:PRINTER;
DES:EPSON[SP]Stylus[SP]C110;
Table 1-9. Primary Power Specifications
Item 100-120 V model 220-240 V model
Rated power supply voltage 100 to 120 VAC 220 to 240 VAC
Input voltage range 90 to 132 VAC 198 to 264 VAC
Rated current 0.6 A 0.3 A
Rated frequency 50 to 60 Hz
Input frequency range 49.5 to 60.5 Hz
Insulation resistance 3000 V (for one minute)
Energy conservation International Energy Star Program compliant
Power
consumption
Printing
(ISO10561 Letter Pattern)
15 W 15 W
Sleep mode 2.0 W 2.0 W
Standby mode (power-off) 0.2 W 0.4 W