Epson Stylus C110 User Manual

EPSON Stylus C110/C120/D120 Revision B
DISASSEMBLY/ASSEMBLY Disassembling Printer Mechanism 98
3. Release the Timing Belt from the groove of the CR Unit.
Figure 4-64. Removing CR Unit (2)
 The Ink Position Label is not included in the CR Unit. When
replacing the CR Unit, order the Ink Position Label separately
and attach the label as shown below
Figure 4-65. Attaching Ink Position Label
Timing Belt
Groove
CR Unit
Ink Position Label Carriage Cover
Attach the label here.
The chipped corner must
come to the upper left.
 Put the part of the Timing Belt that has serrated surface on its
both sides into the groove of the CR Unit.
Figure 4-66. Installing Timing Belt
 After removing/replacing the CR Unit, be sure to perform the
specified adjustment. See
Chapter 5 “ ADJUSTMENT”
(p.107)
 After replacing the CR Unit, be sure to perform the required
lubrication. See
Chapter 6 “ MAINTENANCE” (p.116)

Epson Stylus C110 Specifications

Print Quality

maximum resolution	5760 X 1440 dpi
minimum ink droplet volume	3 pl

Print Speed

black text memo (A4)	Approx. 37 ppm (Draft) / 25 ppm (Default)
colour text memo (A4)	Approx. 20 ppm (Draft) / 11 ppm (Default)
photo (4R/4x6”)	Approx. 35 sec per photo (Draft W/Border)

Ink Cartridges

black ink cartridge (T0731H)	2 cartridges 740 pages
black ink cartridge (T0731)	2 cartridges 470 pages
magenta ink cartridge (T0733)	350 pages (Composite Yield)

Paper Handling

paper feed method	Friction Feed
paper hold capacity	120 sheets, A4 Plain paper
maximum paper thickness	0.33 mm

Electrical Specifications

rated voltage	AC 220-240V
rated frequency	50~60 Hz
power consumption	Approx. 15W (per ISO10561 Letter Pattern)

Weight and Dimensions

weight	3.9 kg
height	161 mm
width	240 mm
depth	435 mm