Epson TM-C7500 Series User Manual

189
Appendix
Paper Specifications
The following is the type and the size of paper specified for this printer.
•TM-C7500
 When using paper other than the specified, users must evaluate the recognition rate in
advance to avoid deterioration of the paper feed accuracy/barcode recognition rate/print
quality and frequent occurrence of paper jams.
 Depending on the temperature and humidity, the synthetic labels and paper backing have
different ratios of expansion and contraction, and this causes the paper to curl. If the paper
curls, the paper may be rubbed by the print head and become contaminated, or the paper
may jam.
 Do not use the paper which is extended by connecting with tape and others. The paper may
be detected incorrectly by the connected line, and rubbed by the print head and become
contaminated, or the paper may jam.
Media form Media type Media source Width
Full-page label (Black mark) Plain label
Matte label
Synthetic label
Roll paper 50 mm to 112 mm 
{1.97 to 4.41"}
(Backing paper width)
46 to 108 mm 
{1.81 to 4.25"}
(Label width)
Die-cut label (Gap) Plain label
Matte label
Synthetic label
Roll paper 50 mm to 112 mm 
{1.97 to 4.41"}
(Backing paper width)
46 to 108 mm 
{1.81 to 4.25"}
(Label width)
Die-cut label (Black mark) Plain label
Matte label
Synthetic label
Roll paper
Fanfold paper
50 mm to 112 mm 
{1.97 to 4.41"}
(Backing paper width)
46 to 108 mm 
{1.81 to 4.25"}
(Label width)

Epson TM-C7500 Series Specifications

General

Brand	Epson
Model	TM-C7500 Series
Category	Label Maker
Language	English