Epson TM-C7500 Series User Manual

40
Connecting the Power Cable
Connect the power cable by following the steps below.
1
Insert the power cable connector into the AC inlet on the product securely
to the bottom.
2
Fully insert the power plug securely into the outlet.
WARNING
 Use only AC 100 V for the power supply. Using other type of power supply may cause
electric shock or fire.
 Be sure to install this product in the vicinity of a power outlet so that you can immediately
unplug the product if some fault or other problem occurs.

Epson TM-C7500 Series Specifications

General

Brand	Epson
Model	TM-C7500 Series
Category	Label Maker
Language	English