74
9
Enter the size of the paper (unit: mm).
10
Click [Add]. User Defied Media will be registered and displayed on the list of
[Defined Media Layout].
11
Click [Close].
12
From [Media Layout], select the newly created media layout.
13
Click [Apply Settings].
This completes the settings of media source, media coating type, media form and media detection.
When enlarging the print area, put a checkmark in [Borderless Printing] to eliminate margins.
When the margins are zero, the print may extend outside of the media/label. Use it accordingly.
When [Borderless Printing] is checked, [Feather Edges] can be checked.
When [Feather Edges] is checked, gradation processing is performed on the margin areas.
To Next Page
Loading...
Need help?
General
