B
Right-click the product icon on the taskbar, then select Head Cleaning.
If the product icon does not appear, refer to the following section to add the icon.
& “From the shortcut icon on the taskbar” on page 19
C
Follow the on-screen instructions.
Using the Head Cleaning utility for Mac OS X
Follow the steps below to clean the print head using the Head Cleaning utility.
A
Make sure that no warnings or errors are indicated in the control panel.
B
Access the Epson Printer Utility 4.
& “Accessing the printer driver for Mac OS X” on page 19
C
Click the Head Cleaning icon.
D
Follow the on-screen instructions.
Using the product buttons
Follow the steps below to clean the print head using the product buttons.
A
Make sure that no warnings or errors are indicated in the control panel.
B
Hold down the + button for three seconds until the P light flashes.
The product starts cleaning the print head.
c
Important:
Never turn off the product while the P light is flashing. Doing so may damage the product.
User’s Guide
Maintaining Your Product and Software
49