Epson WorkForce WF-2010W User Manual

Important Instructions
Safety Instructions
Read and follow these instructions to ensure safe use of this product. Make sure you keep this guide for future
reference. Also, be sure to follow all warnings and instructions marked on the product.
❏ Use only the power cord supplied with the product and do not use the cord with any other equipment. Use of other
cords with this product or the use of the supplied power cord with other equipment may result in fire or electric
shock.
❏ Be sure your AC power cord meets the relevant local safety standard.
❏ Never disassemble, modify, or attempt to repair the power cord, plug, printer unit, or options by yourself, except
as specifically explained in the product’s guides.
❏ Unplug the product and refer servicing to qualified service personnel under the following conditions:
The power cord or plug is damaged; liquid has entered the product; the product has been dropped or the casing
damaged; the product does not operate normally or exhibits a distinct change in performance. Do not adjust
controls that are not covered by the operating instructions.
❏ Place the product near a wall outlet where the plug can be easily unplugged.
❏ Do not place or store the product outdoors, near excessive dirt or dust, water, heat sources, or in locations subject
to shocks, vibrations, high temperature or humidity.
❏ Take care not to spill liquid on the product and not to handle the product with wet hands.
❏ Keep this product at least 22 cm away from cardiac pacemakers. Radio waves from this product may adversely
affect the operation of cardiac pacemakers.
Note:
The following provides safety instructions for ink cartridges.
& “Replacing Ink Cartridges” on page 32
Product Advisories and Warnings
Read and follow these instructions to avoid damaging the product or your property. Make sure you keep this guide for
future reference.
Setting up/using the product
❏ Do not block or cover the vents and openings in the product.
❏ Use only the type of power source indicated on the product’s label.
❏ Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off.
User’s Guide
Important Instructions
7

Epson WorkForce WF-2010W Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	- pages per month
Number of print cartridges	4
Maximum resolution	5760 x 1440 DPI
Print speed (black, normal quality, A4/US Letter)	9 ppm
Print speed (color, normal quality, A4/US Letter)	4.7 ppm
Total input capacity	100 sheets
Total output capacity	- sheets
Paper tray media types	Envelopes
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
ISO C-series sizes (C0...C9)	C6
Maximum ISO A-series paper size	A4
Standard interfaces	Ethernet, USB 2.0, Wireless LAN
AC input frequency	50 - 60 Hz
Power consumption (off)	2 W
Power consumption (printing)	12 W
Sustainability certificates	ENERGY STAR
Product color	Black
Built-in display	-
Country of origin	Indonesia
Market positioning	Home & office
Pallet width	800 mm
Pallet height	2130 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	45 pc(s)
Quantity per pallet (UK)	54 pc(s)
Quantity per pallet layer	5 pc(s)
Quantity per pallet layer (UK)	6 pc(s)
Package depth	448 mm
Package width	345 mm
Package height	220 mm
Package weight	4200 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	264 mm
Width	392 mm
Height	148 mm