6.
Click Browse on Import.
7.
Select the le you want to import and then click Open.
When you select the binary le, in Password enter the password you set when exporting the le.
8.
Click Import.
e
conrmation
screen is displayed.
9.
Click OK.
e validation result is displayed.
❏ Edit the information read
Click when you want to edit the information individually.
❏ Read more le
Click when you want to import multiple les.
10.
Click Import, and then click OK on the import completion screen.
Return to the device's property screen.
11.
Click Transmit.
12.
Click OK on the conrmation message.
e settings are sent to the printer.
13.
On the sending completion screen, click OK.
e printer's information is updated.
Open the contacts from Web
Cong
or printer's control panel, and then check that the contact is updated.
Preparing to Scan
Scanning using the control panel
e scan to network folder function and the scan to mail function using the printer’s control panel, as well as the
transfer of scan results to mail, folders, etc. are performed by executing a job from the computer.
Administrator Information
>
Settings to Use the Printer
>
Preparing to Scan
335
To Next Page
Loading...
Need help?
General