DF 500 DF 700
1716
1
1.4 Performing basic settings for the DOMINO joining machines
The DF 500 and DF 700 DOMINO joining machines are generally similar in handling and setting
options. You should be aware of these in order to fully utilise the machines’ flexibility. All basic
settings are explained step by step below. We refer to these basic settings where appropriate in
the individual application examples.
To switch on the DOMINO joining machine, connect the plug-it
cable to the tool, attach the extractor hose and then push the
on/off switch on the top of the tool forwards and down until it
locks in position.
To switch off, press the on/off switch at the rear to unlock.
1.4.1 Switching on/off
2016_FES_DOMINO_Book_GB-en.indb 16 03.03.16 12:13
To Next Page
Loading...
Need help?
General
