Operation
24
427-0200-00-12 Revision 100
This document does not contain any export-controlled information.
·
The mouse wheel, when the mouse pointer is over live video.
·
The zoom functions independently for each camera sensor. For example, zooming in when viewing
thermal images does not affect visible images or video streams.
·
Zooming in and out affects the video streams, unlike the Live Video Refresh Rate setting.
System Settings and Other Options
Users assigned the admin or expert role can click System Settings to configure the camera. For more
information, see the Configuration chapter.
Additional choices are for Help and Logout.
3.2.1 Video Page
The camera provides three video streams: two visible streams (V1 and V2) and one thermal stream (T1). All
video streams are available for viewing using a client program or third-party ONVIF systems.
In general, it is not necessary to modify the default parameters. In some cases, such as when an IP video
stream is sent over a wireless network, it can be useful to tune the video streams to reduce the bandwidth
requirements. To modify the parameters for a particular video stream, click the relevant button (V1, V2, or
T1).
On the camera web page, the live video is not the actual video stream. Changes to stream settings might
not affect the live video. Check any changes to stream settings using a client program or third-party
ONVIF system.
Visible 1 / Visible 2
Codec options for the visible streams are H.264 or MJPEG.
Resolution options are 3840x2160 (4K), which is available only with H.264 encoding; 1920x1080 (1080p);
1280x720 (720p); and 640x480 (480p). The Frame Rate range is 5-30 FPS (frames per second).
To Next Page
Loading...
Need help?
General
