FLIR Saros DM Series User Manual

Camera Overview
3
427-0200-00-12 Revision 100
November 2019
This document does not contain any export-controlled information.
Streaming
Resolution
Visible: Up to 1080p on each stream at 30 FPS each. With
4K, one stream at 30 FPS, or one stream at 15 FPS and
second stream at 30 FPS up to 1080p.
Thermal: 640x512 @ 30 FPS max
Thermal Image
Settings
Auto AGC, Digital Detail Enhancement (DDE), Brightness,
Sharpness, Contrast
Thermal AGC
Region of Interest
(ROI)
Default, presets and user-definable to ensure optimal image
quality on subjects of interest
Image Uniformity
Optimization
Automatic Flat Field Correction (FFC) - Thermal and
Temporal Triggers
System
Integration
Ethernet
1 Gbps
Control Interfaces
FLIR SDK; FLIR CGI; ONVIF Profile S
Network
Supported
Protocols
IPV4, HTTP, HTTPS, Bonjour, UPnP, DNS, NTP, RTSP, RTP,
TCP, UDP, ICMP, IGMP, DHCP, ARP
Pan / Tilt
Performance
Pan Angle /
Speed
360° continuous / 0.1° to 90°/s
Tilt Angle / Speed
-10° to 90°/0.1° to 60°/sec
Programmable
Presets
128
Preset Accuracy
Pan: 0.16° Tilt: 0.18°
Sequence &
Pattern
8 each
Mechanical Flip
Enable / disable
General
Camera Platform
Type
PTZ Dome
Weight
3.8 Kg (8.38 lbs.)
Dimensions
(H x D)
300 x 207 mm (11.8 x 8.15 in.)
Input/Output
Input: Four sets / 5V 10kΩ pull up
Output: Two sets / relay output, 120mA max at 24 VDC / 24
VAC
Input Voltage
12 VDC (±10%)
24 VAC (±10%)
Universal Power over Ethernet (PoE)-Injector
Power
Consumption
12 VDC, 2.5A, 30W
24 VAC, 2.36A, 57VA
55 VDC, 0.62A, 34W
Audio
Bi-directional via terminal block connection
Environmental
IP Rating (Dust &
Water Ingress)
IP66
Operating
Temperature
Range
-40°C to 55°C cold start

FLIR Saros DM Series Specifications

General

Brand	FLIR
Model	Saros DM Series
Category	Security Camera
Language	English