1. Press the phone button; when the
display indicates no phone is paired,
press OK.
2. When Add Bluetooth Device appears,
press OK.
3. When Find SYNC appears in the
display, press OK.
4. Put your phone into Bluetooth
discovery mode. Refer to your phone's
user guide if necessary.
5. When prompted on your phone's
display, enter the six-digit PIN provided
by SYNC in the radio display. The
display indicates when the pairing is
successful
Depending on your phone's capability and
your market, the system may prompt you
with questions such as setting the current
phone as the primary phone (the phone
SYNC automatically tries to connect with
first upon vehicle start-up), downloading
your phone book, etc.
Pairing Subsequent Phones
Note: Make sure the vehicle ignition and
radio are turned on and the transmission is
in position P.
Note: To scroll through the menus, press
the up and down arrows on your audio
system.
1. Press the phone button and scroll until
System Settings is selected.
2. Press OK and scroll until Bluetooth
Devices is selected, then press OK.
3. Scroll until Add Bluetooth Device is
selected, then press OK.
4. When Find SYNC appears in the
display, press OK.
5. Put your phone into Bluetooth
discovery mode. Refer to your phone's
user guide if necessary.
6. When prompted on your phone's
display, enter the six-digit PIN provided
by SYNC in the radio display. The
display indicates when the pairing is
successful.
The system then prompts with questions
such as if you would like to set the current
phone as the primary phone (the phone
SYNC automatically tries to connect with
first upon vehicle start-up), download your
phone book, etc.
Phone Voice Commands
"PHONE"
"Go to privacy"
"Call <name>"
1
"Hold"
"Call <name> at home"
1
"Join"
"Call <name> at work"
1
"Menu"
2,4
"Call <name> in office"
1
"Phone book <name>"
2
"Call <name> on mobile OR cell"
1
"Phone book <name> at home"
2
"Call <name> on other"
1
284
SYNC®
To Next Page
Loading...
Need help?
Curb Weight
Weight and Dimensions
