Getting started
Connecting cables to the monitor
The dat a cables supplied h ave two 20-pin DP plugs or two 20-pin USB plugs for
connection to the monitor and to the computer.
Refer to t he operating manual for the computer for information on the computer’s ports and interfa ces.
► Select the appropriate data cable for your computer.
► P series: Plug a data cable connector to the USB-C, HDMI or Display port socket on the monitor.
B Series: Plug a data cable connector to the HDMI, Display po rt, DVI
or VGA socket on the monitor.
The monitor automatically detects the input when only one signal source is connected.
A High Speed HDMI cable is needed for connection via HDMI.
► If you are not using the P-series USB-C port, plug the USB 3.0 cable supplied
(USB-A to USB-B) into the USB-B port socket (USB 3.2 Gen1, Upstream) and the
other end of the cable into a U SB-A s ocket on the computer.
► Plug the network cable supplied into the socket on the m onitor.
A lock (Security Lock) can be mounted in the security slot to protect the monitor
against theft. A Security Lock is not included w ith the monitor at delivery.
Fujitsu 19
To Next Page
Loading...
Need help?
General