Operation
Function Description
ACR
Enable/disable dynamic contrast
This function improves the contrast by automatically controlling the
background lighting in relation to the image being displayed.
This setting can only be configured in Office, Video and Custom application
mode.
As soon as ACR is enabled, Auto brightness is automatica lly disabled.
Auto Brightness
Enable/disable automati
c control of the brightness
This function is used to a
utomatically control the brightness of the
background lighting usi
ng th e ambient light sensor.
This setting only appea
rs on models with an a mbient light sensor and can
only be enabled in Office
, Photo or Custom application mode.
As soon as Auto brightn
ess is enabled, ACR is automatically disabled
Lighting Guide
Enable/disable advice on workplace lighting
With this function, advice is displayed if the a mbient light at the workplace
does not meet the ergonomic recommendations for working at the computer
screen.
This setting only appears o n models with a light senso r.
Auto level
Adjust the signal level
With this function you can automatically set the contrast.
Press the
button to run the function.
This setting only appears with an analogue video signal (e.g. VG A).
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press the
button and the ON/OFF button at the same time and
keep them pressed for several seconds.
The message OSD locked / unlocked is displayed.
Please proceed in the same manner to release the locked OSD menu again.
Fujitsu 45
To Next Page
Loading...
Need help?
General