Fujitsu P2410 Series User Manual

Additional inform a tion
Operating system
► In the settin
gs of the Microsoft Windows operating system, open the Power options - System
settings hea
der and set the desired response characteristics of the On/Off switch.
► For the Power button function, press and hold down the On/Off switch on
the monitor for more than 2 second s.
► For the Sle
ep button function) press the On/Off switch on the monitor and
hold it dow
n for less than 2 seconds.
If the system connected via the US B-C is in power-saving mode, the status LED can show
you whether the system is fully compatible with All-In-One mode:
Status L
ED
Meaning
Flashi
ng at
1-seco
nd intervals
Your system is completely compatible with the All-In-One mode. In any
status, you can turn the system on and off using th e On/Off switch on the
monitor.
Flashing at
3-second intervals
Your system is only compatible with the All-In-One mode to a limited extent.
It is not possible from every status to switch on the c omputer using the
On/Off switch.
Fujitsu 59

Fujitsu P2410 Series Specifications

General

Brand	Fujitsu
Model	P2410 Series
Category	Monitor
Language	English