Additional inform a tion
KVM feature
Your monitor has a KVM f unct ion. This involves the two USB ports designated as "Upstream"
being switched over in response to the selected input signal.
Input signal USB-Upstream
HDMI
USB-B
Display port
USB-B
USB-C USB-C
This enables you to switch or ‘swap’ between any peripherals connected to the monitor
and the integrated network port between two computers.
► For more convenient swi
tching between two co mputers, press and hold down the key
until the progress bar
for the Swap Inputs function (switch between inputs) has reached 100%.
The monitor switches between USB-C and the other input signal, i.e. the one used most recently.
Swap Inputs
If data carriers are connected to the monitor, it is advisable before cha nging the input
signal to disable the Remove hardware safel y function to prevent the loss of data.
The Swap Inputs function is only enabled if a computer is connected to both
of the USB p orts designated as "Upstream".
Fujitsu 55
To Next Page
Loading...
Need help?
General