Fujitsu P2410 Series User Manual

Troubleshooting
Troubleshooting
Should an error occur, first check the following points. If the distortion is still not eliminated,
the monitor should, if possible, be checked on another computer.
If you cannot solve the problem, please contact our Service Desk.
Having this problem? Check the follo win g points:
No screen display
Power indicator does not light up
► Check whet her the power cable on the
monitor is connected correctly.
► Check whether the comput
er is switched on.
No screen display
Power indicator is lit
► Check whether the computer is switched on.
► Check whether the data cable for the
monitor is correctly attached to the mon itor
port on the computer.
► Press any key on the computer keyboard.
The compute r may be in p ower saving
mode.
► Alter the brightness and/or co ntrast until you
get a picture.
Message: No Signal
► Check whether the data cable for the
monitor is correctly attached to the mon itor
port on the computer.
► Check whether the computer is switched on.
Message:
Frequency out of range: ## kHz / ## Hz
Please change the display mode to 1920
x 1080 with 60 Hz
The input sign
al (horizontal frequency and
refresh rate
) at the displayed input does not
correspond t
o the technical data for the monitor.
► Adjust the v
ideo frequency range using the
computer so
ftware (see documentation for
the compute
r or display adapter).
► Set a different screen resolution using the
computer software (see documentation for
the computer or display adapter).
Daisy Chain does not work There may not be enough bandwidth to feed the
second monitor.
► Reduce the display refresh rate and/or the
colour depth in the graphics settings of the
system.
64 Fujitsu

Fujitsu P2410 Series Specifications

General

Brand	Fujitsu
Model	P2410 Series
Category	Monitor
Language	English